Important - MIRKA MR-38CV Instrucciones De Manejo

70 mm x 198 mm (3 in. x 8 in.) 10,000 OPM Orbital Sanders (See "Product Configuration/Specifications" Table for particular Model)
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008.
Following the provisions of 89/392/EEC as amended by 91/368/EEC, 93/44/EEC & 93/68/EEC Directives and consolidating Directive
06.08.2010 Jeppo
Place and date of issue
Operator Instructions
Includes – Warranty, Please Read and Comply, Proper Use of
Tool, Work Stations, Putting the Tool Into Service, Operating
Instructions, Product Configuration/Specifications Tables,
Parts Page, Parts List, Sander Spare Parts Kits, Trouble
Shooting Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm
The warranty terms are as follows:
- 12 months on KWH MIRKA air tools.
- 3 months on tool parts repaired by KWH MIRKA.
The warranty period commences at the date of purchase. The warranty only covers imputable material and manu-
facturing defects.
Parts replacement or repair during the warranty period is free of charge if carried out by an official KWH MIRKA
service center.
Freight costs are always to be paid by the purchaser.
The warranty does not include:
Normal wear and tear i.e.
- Bearings, backing pad, shroud, rotor, vanes, swivel fitting, muffler
Overloading or improper use i.e.
- Dropping the tool in water
- Damage caused by misuse
- Damage caused by anything other than defects in material and workmanship
- Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator:
- Changing of the backing pad
- Changing of the spindle bearing
- Changing of the exhaust fitting
- Changing of the shroud
Please Note! All other service operations must be carried out by an authorized Mirka service center.
The warranty only covers the local repair, not the tool replacement.
Compensation for downtime and loss of production are explicitly not included in the warranty.
Repair claims under warranty will only be honored if the tool is returned in its original assembled state. Any disas-
sembly will void the warranty.
The warranty can only be submitted to the dealers where the tool was purchased.
Declaration of conformity
66850 Jeppo, Finland
declare on our sole responsibility that the products
Tom Nordström
Name
Recommended Maximum
Hose Length
3/8 in 8 meters
MIRKA 10,000 OPM
70 mm x 198 mm (3 in. x 8 in.)
ORBITAL SANDERS
KWH Mirka Ltd.
2006/42/EC
Signature or equivalent marking of authorized person

Important

Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Safety Glasses
Safety Gloves
Maximum Working Pressure
Recommended Minimum
25 feet
Warranty
4
Breathing Masks
Ear Protection
Air Pressure
6.2 bar
NA
90 psig
NA