Operator Instructions; Important - MIRKA AOS Instrucciones De Manejo

32 mm (1 in.) 8,500 rpm Angle Orbital Sander (See "Product Configuration/Specifications" Table for particular Model)
1
/
4
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008. Following the
provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC
Jeppo 12.01.2015
Place and date of issue

Operator Instructions

Includes – Please Read and Comply, Proper Use of Tool,
Work Stations, Putting the Tool Into Service, Operating In-
structions, Product Configuration/Specifications Tables, Parts
Page, Parts List, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo
Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the products
Company

Important

Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters 25 feet
34
Mirka 8,500 rpm
AOS 32 mm (1 1/4 in.)
Stefan Sjöberg, CEO
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Air Pressure
Maximum Working Pressure 6.2 bar 90 psig
Recommended Minimum NA NA
Original Instructions