Care & Cleaning - Toto Renesse TL170DD Manual De Instrucciones Y Del Propietario

1) Apply pipe tape to the threads of the
drain body.
2) Insert drain body into the drain hole.
3) Assemble the gasket, flange nut and
lock nut to drain body.
4) Apply pipe tape to the end threads of
drain body and install the tail piece.
5) Make sure that cable faces toward the
faucet.
6) Connect the cable base connector with
cable handle connector.
For the best performance and cleanliness, please maintain your faucet every day.
1) Unscrew the aerator. Use spout key provided.
2) Use a brush to clear the dirt and debris from the aerator.
3) Reinstall the aerator. Use spout key provided.
C AUTION: Be careful not to lose the parts when they
are removed.
To ensure that the product maintains its specified flow
rate to meet EPA standard, always use the manufacturer's
specified aerator for that faucet.
• If slightly dirty, use water and a damp cloth to wipe away the dirt completely.
• If very dirty, use a cloth with diluted detergent to wipe away the dirt, then rinse and dry.
CAUTION!
Do not use the following materials, which are harmful to the faucet's surface finish:
• Acidic cleaning agents, alkaline cleaning agents, or bleaches, except for TOTO scale cleaner
• Solvents like thinner or benzene
• Cleaning agents or grinding powders that contain coarse particles
• Nylon scrubbers and brushes
INSTALLATION PROCEDURE (continued)
Installing the Pop-up Drain with Cable
(Only for TL170DD/TL170DDLQ)
Drain Body
Lock Nut
Drain Body
Lock Nut
Tailpiece
Groove, where the
connection is made
Clip
CARE & CLEANING
Maintaining the Water Outlet
Cleaning the Faucet
Flange
Drain Gasket
Flange Nut
Cable Handle
Connector
Lavatory
Cable
Drain
Body
U-cup Seal
Tailpiece
Aerator
Spout Key
Unscrew it
7
Drain Lever
Press the clip
to be able to
connect
Clip
Cable Base
Cable
Connector
Drain Lever
Pop-up
Cable Handle
Connector
Drain
Cable Base
Seal
Connector
Nut
Cable
Brush
Aerator