Anexo I: Diagrama Eléctrico - Nahita 603/10 Manual De Instrucciones

Baño de bloque metálico
Tabla de contenido

Publicidad

ANEXO I: DIAGRAMA ELÉCTRICO
(Este diagrama es sólo para su referencia. El fabricante se reserva el derecho a posibles
modificaciones y mejoras sobre el).
Alimentación AC 220V 50Hz
Fusible
AC 250V 2.5 A
Enchufe único
AC 250V 10 A
Interruptor
Ventilador
encendido/apagado
12V 150W
J 2
J 3
Módulo de conducción
J 1
Refrigerador TE
Pág. 12
Manual de instrucciones 50603010
CASTELLANO
Teclado
LCD
membrana
16 PIN
6 PIN
J 11
J 44
J 6
J 33
CPU
J 22
Sensor
Revisión 1 Aril-08
Thank you for choosing this equipment. We sincerely wish that you enjoy your dry bath
Nahita 603/10. We highly recommend looking after this equipment according to what is
stated in this manual.
Nahita develops its products according to the CE marking regulations as well as
emphasizing the ergonomics and security for its user.
The correct using of the equipment and its good quality will permit you to enjoy this
equipment for years.
The improper use of the equipment can cause accidents and electric discharges, circuit
breakers, fires, damages, etc. Please read the point of Maintenance, where we expose the
security notes.
TO GET THE BEST RESULTS AND A HIGHER DURATION OF THE EQUIP-
MENT IT IS ADVISABLE TO READ THOROUGHLY THIS MANUAL BEFORE
OPERATING WITH THE EQUIPMENT.
Please bear in mind the following:
This manual is inseparable from the dry bath Nahita 603/10, so it should be available for
all the users of this equipment.
You should carefully handle the dry bath avoiding sudden movements, knocks, free fall
of heavy / sharp objects on it. Avoid spilling liquids inside the equipment.
Never dismantle the different pieces of the dry bath to repair it yourself, since it could
produce a defective use of the whole equipment and a loss of the product warranty, as
well as injuries on people that handle the dry bath.
To prevent fire or electric discharges avoid dry or dusty environments. In case it may
happen unplug the equipment immediately.
If you have any doubt about setting up, installation or functioning do not hesitate in
contacting your wholesaler. You can also tell us any doubts or suggestions you have by
contacting Nahita Technical Assistance Department by email to asistencia@auxilab.es or
by telephone: +34 807 117 040 (0.30 Euros/min).
This equipment is protected under the Warranties and consumer goods regulation
(10/2003).
Overhaul is not covered by the dry bath warranty.
Operations made by non-qualified staff will automatically produce a loss of the equip-
ment warranty.
Neither fuses nor accessories (including their loss), are covered by the product's
warranty. The warranty neither covers piece's deterioration due to the course of time.
Please make sure you keep the invoice, either for having the right to claim or asking for
warranty coverage. In case you have to send the equipment to Nahita Technical Assistance
Department you should enclose the original invoice or a copy as guarantee.
Please do not forget filling the warranty certificate and send it before 15 days after the
date of purchase.
Manufacturer reserves the right to modify or improve the manual or equipment.
Version 1 April-08
Instruction manual 50603010
ENGLISH
Page 13

Publicidad

Tabla de contenido
loading

Tabla de contenido