Configuration; First Steps - eKuore Pro Serie Manual De Usuario

4. CONFIGURATION

Battery indicator
Volume ( - + )
Micro USB
battery charger
Jack 3.5mm
Audio output

4.1 First Steps

Before starting using eKuore Pro remember to charge it for at least 2 hours.
1. Screw the bell into the threaded hole
2. Connect the earbuds (ref. EP1202) on the audio output.
Sound can only be listened through external headphones or speakers,
not through the smartphone's speaker.
3. Switch on the eKuore Pro clicking ON/OFF button.
Filter indicator: heart,
MODE / FILTER / RECORDING BUTTON
lung and wide range
Short press (1 click):
Device status Alternate between the different filters
Mode / filter /
recording button Cardiac
Intermediate press: Start recording
(eKuore Pro have to be connected to the APP)
On / Off button
Long press: Change mode (Wifi / No-wifi)
Devices status:
No-Wifi
Wifi
Battery
Wifi
indicator
connection
17
Lung Wide range
Connected (green)
Blinking: Waiting for connection
Connected (blue)
Level above 80% (green)
Level between 20-80% (yellow)
Level below 20% (red)
EN
[English]