Technical Specifications - eKuore Pro Serie Manual De Usuario

7. TECHNICAL SPECIFICATIONS

Weight without chestpiece
Dimensions without chestpiece
Weight with chestpiece
Dimensions with chestpiece
Input voltage during
the load
Power
Battery
USB Port
Immunity Test IEC 60601 Test Level
Discharging electrostatic Contact: ±8 kV
electricity(DES) IEC Air: ±15 kV
61000-4-2
Fast electrical transients ±2 kV on lines of mains
IEC 61000-4-4 supply
±1 kV on input /output
lines
85 gr
13cm x 5 cm x 3 cm (WxDxH)
150 gr
13cm x 5 cm x 3 cm (WxDxH)
5V DC, 500 mA
2,5 W
Rechargable, mAh lithium
polymer.
Do not replace.
Do not connect while the
device is been use on the
patient
Conformity level
Contact: ±8 kV
Air: ±15 kV
Not applicable
Not applicable
Temperature
Humidity
Transportation and storage temperature
Transportation and storage humidity
Transmission frequency range
Modulation type
Standard protocol
Effective radiated power
Operating system requirements
Electromagnetic environment – Indications
The floor must be Wood, cementor ceramic coating. If
the floor is covered by a synthetic material, the relative
humidity must be less than 30%.
The quality of the power should be comparable to that
a commercial establishment or hospital.
23
EN
[English]
0 a +40° C
+15 a +93%
-20 a +45 ºC
+15 a +93%
Between 2.412 GHz y
2.484 GHz
DSSS
IEEE 802.11bg
15dBm (32mW)
Android 6.0 or later,
and with iOS 10.0 or
later devices.