Maintenance And Warranty; Environmental Conditions - eKuore Pro Serie Manual De Usuario

4.4.2 Use of the APP
ANDROID
1. Open the application if you have not open it before and
follow the steps explained at the APP
2. Press the button "Select"
3. On the wifi networks menu, tap the eKuore Pro network which
correspond the SN number of your eKuore Pro device, it is placed at
the rear.
4. Once you have selected the wifi net, go back to eKuore Pro APP.
5. Click on "Ready".
4.5 Make a recording
1. Open the APP eKuore Pro
2. Connect the device
3. Tap the red button on the screen or press `mode button' intermediately
4. To stop the recording tap again on the recording APP button or press stethoscope 'mode button' intermediately

5. MAINTENANCE AND WARRANTY

5.1 Environmental conditions

To extend eKuore Pro® Series' product lifetime, avoid storage and transportation temperatures outside the range of -20 to 45 °C, and humidity levels between
15 and 93%; and operation temperatures outside the range of 0 to +40 °C, and humidity levels between 15 and 93%. As well as solvents and oils. Failure to follow
the recommendations for use and maintenance could result in damage to the internal components of the stethoscope.
5.2 Cleaning
When the power supply is off, the entire plastic surface can be cleaned sliding an alcohol pad. Excess fluid during cleaning can cause leakage of moisture
on internal components.
Usually, it is not necessary to remove the membrane for cleaning. If necessary, thoroughly follow the instructions in section 5.3.
iOS
1. Go to wifi settings on your smartphone.
2. Select the wireless network which match the last 5 characters of
your eKuore Pro serial number.
3. Open eKuore Pro APP
4. Click on 'Go to Monitor'
5. When the connection is established, the blue LED will stay fixed
(Wifi mode).
19
EN
[English]