Use - Chauvin Arnoux 10A Manual De Instrucciones

„ Connect the 2 double retractable 10 A test probes to the 4 terminals of the
instrument.
Loosen the nuts on the binding posts, insert the spade terminals, being very
careful to connect the red leads to the voltage terminals (P), then tighten the nut.
If the instrument has safety terminals, unscrew the spade terminals to make
the connection.
„ Place the voltage probes (identified by red spots) as close as possible to one
another.
„ During the measurement, hold the test probes firmly in contact with the object
being measured.
For details of the measurement configuration, technical characteristics, er-
ror messages and memorization, refer to the user manuals of the C.A. 6240
or C.A. 6250.

2. USE

14
C
1
P
1
P
2
C
2
C
1
P
1
P
2
C
2