Technical Specifications; Safety Instructions; Main Components - SPARKY Professional SP 60 Instrucciones De Uso

DRILL STAND FOR DIAMOND DRILLS
Operating instructions
The drill stand SP 60 ensures convenient and pre-
cise drilling with diamond core drills BBK2 1500 and
BBK3 1500.
WARNING! This drill stand can be used safely
only after carefully reading and strictly observing the
present operating instructions as well as the original
instructions of the diamond core drill.

Technical specifications

Model
▪ Bracket diameter
▪ Maximum feed
▪ Drill bit to column axis
▪ Base dimensions
▪ Overall dimensions
- Height
- Width
- Length
▪ Weight

Safety instructions

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
▪ When mounting and dismounting the drill as well as
performing any operations with them, always check
the position of ON/OFF switch. The drill must be con-
nected to the power supply socket only when this
switch is in OFF position. Always withdraw the drill
plug from the socket upon completion of work.
▪ Assemble the drill stand carefully according the in-
structions before installing the drill. Proper assembly
is important to ensure flawless operation of the drill
stand.
▪ Secure the drill stand on a firm flat surface or wall.
The drill stand must be absolutely immobile to ensure
smooth and secure operation of the drill.
▪ Fasten the drill reliably to the drill stand before starting
to operate it. Slipping the drill in the stand may cause
loss of control.
Operating instructions
▪ Do not overload the drill stand and do not use it as a lad-
der or scaffolding. This may lead to shifting the gravity
centre upwards and cause overturning the drill stand.
▪ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
▪ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
▪ Handle the drill stand carefully. Check that moving
parts function perfectly and do not bind, check for bro-
ken or damaged parts which may affect the stand op-
eration. Replace the damaged parts prior to operation
with the stand. Many accidents are caused by poorly
maintained tools and accessories.
SP 60
▪ When not in use, keep the drill stand out of reach of
children. Do not allow persons unfamiliar with the
60 mm
drill stand or these instructions to operate the stand.
440 mm
Machines are dangerous in the hands of untrained
90 mm persons.
▪ Repair shall be carried out by qualified technicians
165 x 210 mm
only using original spare parts to ensure the drill stand
safety operation.
▪ Hold the drill stand by insulated gripping surfaces
840 mm
only, when performing an operation where the cutting
170 mm
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make
210 mm
exposed metal parts of the drill "live" and could give
9.8 kg
the operator an electric shock.
▪ Always keep the power cable away from the working
area of the drill.
▪ Strictly observe the safety and operation instructions
for the drill and the additional accessories.
▪ Prior to performing any operation with the drill stand,
during interruption of work and when not in use, se-
cure the drill stand by locking the carriage to prevent
undesired movement.

Main components

1. Bolt for fixing the column
2. Column
3. Knob for fixing the carriage
4. Bracket for fixing the drill to the drill stand
5. Upper centring screw
6. Carrying handle
7. Carriage
8. Screw for the carrying handle
9. Toothed shaft
10. Circlip with pin
11. Lever
12. Depth stop
13. Base
14. Bolt
15. Lock nut
16. Steel strap
17. Screw for fixing the drill to the carriage
1
EN