Optional Accessories - Makita DGA700 Manual De Instrucciones

Remove the dust cover from inhalation vent and clean it
for smooth air circulation.
► Fig.24: 1. Dust cover
NOTICE:
Clean out the dust cover when it is
clogged with dust or foreign matters. Continuing
operation with a clogged dust cover may damage the
tool.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
► Fig.25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
Wheel guard for depressed center wheel / flap disc / wire wheel brush
Depressed center wheel / Flap disc
Lock nut / Ezynut *1
Wheel guard for abrasive cut off wheel / diamond wheel *2
Inner flange 78 (Australia and New Zealand only) *3
Abrasive cut-off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only) *3
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
Dust cover attachment
14 ENGLISH
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Side grip
Inner flange *1
Rubber pad
Abrasive disc