Maintenance - Frigomat GX2 A Manual De Uso

7. MAINTENANCE

ROUTINE MAINTENANCE (INTENDED FOR USER)
The fats present in the ice cream mixtures are ideal fields for the proliferation of bacterial
loads and mould. To eliminate this serious problem, all the parts which come into contact
with the product must be thoroughly washed and sanitized by careful procedures and
using suitable sanitizing products. The stainless and plastic materials used on our
machines, in fact, comply with the strictest international provisions and their special shape
facilitates their washing. However this is not enough to prevent the formation of mould and
bacteria caused by insufficient or incorrect cleaning.
FRIGOMAT recommends thoroughly washing and sanitizing the parts in direct contact with
the product after each work shift and in compliance with hygienic standards in force in the
Country where the machine is installed.
To correctly clean your machine, refer to the following operations:
25 - ENGLISH
PREWASHING
• Pour
the maximum
(approximately
machine.
• Turn the main selector on "agitation" in order to start
the beater motor and let it run for about 3'. Pull the
drain plug to drain all the wash water. Repeat the
procedure until the water coming out is clear and
clean.
• Pour
the maximum
cleansing/sanitising solution into the machine.
• Turn the main selector on "agitation" in order to start
the beater motor and let it run for about 15'. Pull the
drain plug to drain all the sanitizing solution.
We suggest using the following sanitising
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml).
admitted load
50°C) drinking water
load
of warm
into the
admitted of