Technical Specifications - Velleman VTSSC60 Manual Del Usuario

10. Maintenance
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a damp, lint-free cloth. Do not use alcohol or solvents.
• Never clean the tip with sand paper, file or any abrasive solution.
• Contact your dealer for spare parts if necessary.
11. Troubleshooting
no temperature reading
•
•
•
soldering iron doesn't work or strange characters on the display
• soldering station is not switched on – check power switch
• power plug not inserted (correctly) into the mains – check connection
• fuse is blown – replace fuse
• processor problem – restart the station
12.

Technical specifications

max. heater power for soldering iron
temperature range
low-voltage iron
power supply
weight
dimensions
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this
device.
For For more info concerning this product and the latest version of this user
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the copyright holder.
03/02/2010
temperature is out of measuring range
soldering iron is not connected properly – check connection
soldering iron is defective – contact your local dealer
VTSSC60
60W
150 - 450°C (±15°C)
24V AC
230V AC / 50Hz
1.9kg
167 x 138 x 92mm (without stand and iron)
6
Rev. 01
®
©Velleman nv