Ec-Declaration Of Conformity - Jonsered CS 2125T Manual De Instrucciones

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saw for tree service Jonsered CS 2125T from 2014's serial numbers and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2009, EN ISO 11681-2:2011.
Notified body: 1008, TÜV Rheinland InterCert kft. 1132, Budapest, Váci út 48/a-b, Hungary, has carried out EC type
examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC type
examination in accordance with annex IX, have the numbers: M3 69248487 0001
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 29, 2014
Per Gustafsson, Development director chainsaw R&D
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
English – 153