Remote Control Unit; Battery Installation; System Connection - Teac A-H300mkII Manual Del Usuario

Remote Control Unit

The amplifier and Reference 300mk
remote control cords can be operated by the provided remote
control unit.
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the A-H300mk
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
< If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other appliances may
operate incorrectly.

Battery Installation

1 Remove the battery compartment cover.
2
Insert two "AAA" (R03, UM-4) dry batteries. Make sure that
the batteries are inserted with their positive "+" and negative
"_" poles positioned correctly.
3
Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they leak,
wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
series connected by
@ Reference 300mk
.
@
< By pressing the STANDBY/ON button of A-H300mk
< When you press the PLAY button of a source, the INPUT
< The source you select by the INPUT SELECTOR of A-H300mk
< When you turn on the system, the source that was selected
< You can use the system remote control unit to operate all the
Dubbing

System Connection

@
If you have TEAC Reference 300mk
system control operations and AI direct play functions are
possible.
switch ON/standby all the unit connected by remote control
cords.
SELECTOR of A-H300mk is set to the source automatically.
@
will be played automatically.
last time will start playback automatically.
unit connected by remote control cords.
Connect the REMOTE CONTROL jack (A or B) of each
component by remote control cords.
A-H300mk
@
Reference300mk
@
REMOTE
CONTROL
Reference300mk
@
REMOTE
CONTROL
When you intend to dub a cassette tape using 2 sets of R-
H300mk , don't connect the remote control cords to the
@
second deck. Please use the buttons on the front panel.
series, convenient
@
, you can
@
@
5