Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.
To reset the MIN/MAX outdoor temperature data and the times at which they were recorded, press
the OUT key continuously for about 3 seconds. This will reset all minimum and maximum data
recorded to the current time, date and temperature.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS
When more than 1 transmitter used:
1.
To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2.
Use OUT key to view the MIN/MAX temperature data for the selected transmitter.
3.
To reset the MIN/MAX temperature data, and the times at which they were recorded, press the
OUT key continuously for about 3 seconds. This will reset the MIN/MAX data recorded to the
current time, date and temperature.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
TEMPERATURE TRANSMITTER
The outdoor temperature is measured and transmitted every 4 seconds. The range of the temperature
transmitter may be affected by the temperature. At cold temperatures the transmitting distance may be
decreased. Please bear this in mind when placing the transmitter.
868 MHz RECEPTION:
If the outdoor temperature data is not being received within three minutes after setting up (or outdoor display
always show "- -. -" in the outdoor section of the weather station during normal operation), please check the
following points:
1.
The distance of the weather station or transmitters should be at least 2 meters away from any
interfering sources such as computer monitors or TV sets.
2.
Avoid placing the transmitters onto or in the immediate proximity of metal window frames.
49
Publicidad
Tabla de contenido
