Care And Maintenance - TFA Dostmann FOCUS Manual De Instrucciones

POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The sensor is supplied with a holder that may be attached to a wall with the two
screws supplied. The sensor can also be position on a flat surface by securing the
stand to the bottom to the transmitter.
To wall mount:
1.
2.
Note:
Before permanently fixing the remote temperature transmitter wall base, pace all units
in the desired locations to check that the outdoor temperature readings are receivable.
In event that the signal is not received, relocate the remote temperature transmitter or
move them slightly as this may help the signal reception.

CARE AND MAINTENANCE


Clean the instrument and the transmitter with a soft damp cloth. Do not use solvents or scouring
agents. Protect from moisture.

Remove the batteries if you do not use the product for a lengthy period.
MALFUNCTION
Secure the bracket onto a desired wall using the screws and plastic anchors.
Clip the sensor onto the bracket.
51