Battery Replacement - TFA Dostmann 60.2521 Instrucciones De Uso

TFA_No. 60.2521_Anleitung
Radio-controlled alarm clock with vibrating wristband
• For the control, slide the CH1/OFF/CH2 switch to CH1 or CH2.
• The LED lamp lights up briefly and a vibration is felt.
• The unit is ready for use.
• The LED lamp lights up red three times every 10 seconds if the bat-
tery has to be charged.
• To charge it, connect the receiver with the USB cable to a powered-
on computer or connect it with a power adapter with an USB out-
put. The receiver has to be connected for at least one hour.
• The green LED light indicates that the battery will be charged. Once
the lamp is off, the battery is charged.
• Slide the CH1/OFF/CH2 switch to the position CH1 for the first alarm
time (ALARM 1) or CH2 for the second alarm time (ALARM 2).
• The LED lamp lights up briefly and a vibration is felt.
• Adjust the vibration intensity with the switch ( ... ).
• Push the receiver back into the bracelet.
• Please take care that the side with the CH1/OFF/CH2 switch is outside
and the SNOOZE button on top.
• When the alarm time is reached - the correct adjustment is made on
the alarm clock and the receiver (ALARM 1 = CH1 or ALARM 2 = CH 2
to activate the wristband), the backlight of the alarm clock will turn
on briefly, the symbol will flash and the receiver will start vibrating.
• Press any button on the alarm clock (except the SNOOZE button) to
turn off the vibration.
• Press the SNOOZE/LIGHT button on the alarm clock to deactivate the
snooze function for both the alarm clock and the receiver.
• Press the SNOOZE button on the receiver to activate the snooze
function (only on the receiver.)
• The vibration will be interrupted for 5 minutes.
26
21.06.2013 9:16 Uhr Seite 14
Radio-controlled alarm clock with vibrating wristband
• Slide the CH1/OFF/CH2 switch to the position OFF to deactivate the
alarm function on the receiver.
7.5 Display
Indication of time and weekday
• Press the MODE button to show the following information:
– Time with hour, minutes and seconds
– Time with hour, minutes and day-of-the-week
– Date and day-of-the-week
– Volume of the alarm tone (loud / quiet)
– Volume button (off / on)
7.6 Backlight
• Press the SNOOZE/LIGHT button. The backlight will come on for 8
seconds.
8. Care and maintenance
• Clean your instruments with a soft damp cloth. Do not use solvents
or scouring agents. Protect them from moisture.
• Remove the batteries if you do not use your instrument for a long
period of time.
• Keep the instruments in a dry place.

8.1 Battery replacement

• Change the batteries of the alarm clock when the battery symbol
appears on the display.
• Open the battery compartment and insert three new batteries 1,5 V
AAA.
• Close the battery compartment again.
27