Battery Replacement - TFA Dostmann 60.1514.02 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
TFA_No. 60.1514_Anleitung
Radio-controlled alarm clock
7. Operation
7.1 Setting of the alarm time
• Set the desired alarm time by turning the dial.
• To activate the alarm function, press the ALARM/ON/OFF switch.
• A red bar appears.
• When the adjusted alarm time is reached, the alarm will ring.
• If the alarm is not stopped manually, the increasing alarm will automati-
cally turn off after certain minutes and will be reactivated twelve hours
later.
• Once the alarm starts to ring, you can activate the snooze function by
pressing the SNOOZE button.
• The alarm will be interrupted for 5 minutes.
• The snooze function can be activated up to six times.
• Press the ALARM/ON/OFF switch once again to deactivate the alarm.
• The red bar disappears.
7.2 Backlight
• Press the SNOOZE button and the light turns on for 5 seconds.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.
16
20.01.2016
16:54 Uhr
Seite 9
Radio-controlled alarm clock

8.1 Battery replacement

• Change the battery when the functions of the device become weak.
• Open the battery compartment and insert one new battery 1.5 V AA,
polarity as illustrated.
• Close the battery compartment again.
9. Troubleshooting
Problems
Solutions
➜ Ensure that the battery polarity is
No hand movement
correct
➜ Change the battery
➜ Wait for attempted reception during the
No DCF reception
night
➜ Choose another place for your product
➜ Check if there is any source of inter-
ference
➜ Restart the device according to the
manual
➜ Change the battery
Incorrect indication
If your device fails to work despite these measures contact the supplier from
whom you purchased it.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido