Product Description; Installation And Connection - Oase OxyMax 100 Instrucciones De Uso

‐ EN ‐
Electrical connection
 Only connect the unit if the electrical
data of the unit and the power supply
coincide. The unit data is to be found on
the unit type plate, on the packaging or
in this manual.
 Protect the plug connections from mois‐
ture.
 Only plug the unit into a correctly fitted
socket.
Symbols used in these instructions
N O T E
Indicates information intended to give the
user a better understanding.
Additional information
 A
Reference to a figure, e.g. Fig. A.
PRODUCT DESCRIPTION
Intended use
OxyMax 100/200/400, referred to in the follow‐
ing as "unit", may only be used as specified in the
following:

For aeration and supplying oxygen to an
aquarium.

Operation under observance of the technical
data.
12
The following restrictions apply to the unit:

Only use indoors and outside of the aquar‐
ium.

Do not use for commercial or industrial pur‐
poses.

Do not use in conjunction with chemicals,
foodstuff, easily flammable or explosive sub‐
stances.
INSTALLATION AND CONNECTION
 A, B
Set‐up the unit

Always install the unit higher than the water
level. This prevents water from possibly flow‐
ing back into the pump.

Use the fastening lug for installation.

Route the power connection cable such that
it forms a drip loop.
When installing the unit, ensure that it

is located outside the aquarium

is not placed on or over the aquarium

cannot fall into the water or move out of po‐
sition.
Damage resulting from incorrect installation is
not basis for a claim within the framework of the
guarantee or warranty.
OxyMax 100/200/400