Description - Hilti WSC 7.25-A36 Manual De Instrucciones

Ocultar thumbs Ver también para WSC 7.25-A36:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Obligation signs
en
Wear eye
Wear a hard
protection
Wear
breathing
protection
Symbols
Read the
Return waste
operating
material for
instructions
recycling.
before use
Rated speed
Revolutions
under no
per minute
load
Saw blade

2 Description

2.1 Use of the product as directed
The power tool is a hand-held, cordless circular saw.
The power tool is designed for cutting wood or wood-like materials, plastics, gypsum plasterboard, gypsum fiberboard
and composites with a thickness of up to 70 mm (2 ⁵/₈") and for making bevel cuts at angles between 0° and 50°.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
Modification of the power tool or tampering with its parts is not permissible.
The use of saw blades that do not comply with the given specification (e.g. diameter, thickness) or the use of cutting
and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible.
Sawing metals is not permissible.
Do not use the power tool to cut tree branches or logs.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
2
Wear ear
hat
protection
Volts
Revolutions
per minute
Location of identification data on the power tool
The type designation can be found on the type identifica-
tion plate and the serial number on the side of the motor
housing. Make a note of this data in your operating in-
structions and always refer to it when making an enquiry
to your Hilti representative or service department.
Wear
protective
Type:
gloves
Serial no.:
Direct
current
Diameter

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido