Description - Hilti WSR 1000 Manual De Instrucciones

Obligation signs
Wear eye Wear ear
en
protection. protection
Symbols
Volts Amps
Nominal Strokes per
stroke rate minute
under no load
Return waste
material for
recycling.

2. Description

2.1 Use of the product as directed
The WSR 1000 is an electrically powered reciprocating saw for professional use. It is designed to be used
for cutting wood, wood-like materials, metals and plastics. The power tool is suitable for use by right or
left-handed persons. An ergonomically designed grip with synthetic rubber covering provides a comfortable,
secure hold and makes the power tool less tiring to use.
The power tool is designed for two-handed operation.
Possible fields of use: Rescue services, public authorities, agriculture and forestry, construction sites,
workshops, renovation, conversion and new construction, metal construction, plumbing, heating and air
conditioning system installation in which the types of cutting work listed above are carried out.
Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
D not use the power tool to cut pipes which still contain liquids.
Do not saw into unknown materials.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5071339 / 000 / 00
Wear
protective
gloves
Hertz
Read the
operating
instructions
before use
Unlocked Locked
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Wear
Hilti representative or service department.
breathing
protection
Type:
Generation: 02
Serial no.:
Alternating
current
Double
insulated