Safety And Intended Use - Mettler Toledo InTap Manual De Usuario

1

Safety and Intended Use

The InTap™ portable oDO analyzer must only be connected, commissioned, and maintained
by qualified specialists in full compliance with the instructions in this User Manual, the appli-
cable norms and legal regulations.
The specialist must have read and understood this User Manual and must follow the instruc-
tions it contains.
The Reference Manual provides further information on the device and can be downloaded via
Internet "www.mt.com/InTap".
The InTap portable oDO analyzer should be operated only by personnel familiar with the device
and who are qualified for such work.
Intended Use
The InTap portable oDO analyzer is a portable measurement device for dissolved oxygen
measurement and for calibration and data logging of optical dissolved oxygen ISM
(InPro 6970 i) installed in the process. The InTap and the sensors communicate via Blue-
®
tooth. For this, the separate Bluetooth interface T100 (order number 30
mounted onto each sensor.
The InTap is designed for use in the beverage industries, in non-hazardous areas. The InTap
is intended to be used indoor.
The following InTap variants are available:
• InTap portable oDO analyzer (metric connectors): order number 30
• InTap portable oDO analyzer (imperial inch / US connectors): order number 30
en 46
432
425 550
InTap Portable oDO Analyzer • 30 461 735 A
sensors
®
819) has to be
457 912