Selecting A Preset Sound Mode; Adjusting The Sound; Subwoofer - JVC KD-ADV7490 Manual De Instrucciones

Selecting a preset sound mode

You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
1
2
3
Preset value setting for each sound mode
Sound mode
Band 1 (100 Hz)
USER
ROCK
CLASSIC
POPS
HIP HOP
JAZZ

Adjusting the sound

You can adjust the sound characteristics to your
preference.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For "EQ" setting, see above.
42
Band 2 (320 Hz)
0 0
+3 +2
+2 +2
0 +1
+4 +1
+3 +2
Select "EQ."
Select "On."
• If "Bypass" is selected, you can listen to the original
sound mode recorded.
display.
Select a preset sound mode.
Preset value
Band 3 (1 kHz) Band 4 (3.2 kHz) Band 5 (10 kHz)
0
0
0
0
–2
+1
3
Adjust the selected setting item.
A
Fad/Bal (Fader/Balance)
1
Press number button 1 (
to move to the "Fad/Bal" adjustment
display.
2
Adjust the speaker output balance by
pressing:
5 ∞
/ : between the front and rear
speakers. [F6 to R6]
4 ¢
/
right speakers. [L6 to R6]
B

Subwoofer

1
Press number button 1 (
move to the "Subwoofer" adjustment
display.
4
2
Use
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
lights up on the
0 0
+1 +1
+1 0
+1 +2
0 +1
+2 +2
)
: between the left and
) to
¢
/ to select a cutoff