Storing Your Own Sound Modes - JVC KD-ADV7490 Manual De Instrucciones

Ocultar thumbs Ver también para KD-ADV7490:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4
Press number button 1 (
move to another setting level.
4
¢
/
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If "Off" is selected in step
adjust the subwoofer phase.
C
Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off:
All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E
Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
) to
: select the quality of
2
, you can only

Storing your own sound modes

You can adjust the sound modes and store your own
adjustments in memory.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
2
Select a sound mode.
3
Select a frequency range to adjust.
4
Adjust the sound elements of the selected
frequency range.
4
¢
1
Press
/
frequency band, then press
enhanced level for the selected frequency
band. [–6 to +6]
2
Press number button 5 (
the control dial to select the frequency.
3
Press number button 5 (
the control dial to select the quality slope (Q).
5
Repeat steps 3 and 4 to adjust the other
frequency bands.
6
Store the adjustments.
to select the
5
/
to
), then turn
), then turn
SETTINGS
43

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-dv7400

Tabla de contenido