Hilti TE 800 Manual De Usario página 19

▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool can result
in cuts and burns.
▶ Wear eye protection. Flying fragments can injure the body and eyes.
▶ Before starting work, check the hazard class of the dust that will be produced when working. Use
an industrial vacuum cleaner with an officially approved protection class in compliance with the locally
applicable dust protection regulations. Dust from materials such as lead-based paint, certain types of
wood and concrete/masonry/stone containing quartz, minerals or metal can be harmful to health.
▶ Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions and/or
respiratory or other diseases among operators or bystanders. Certain kinds of dust are classified as
carcinogenic such as oak and beech dust, especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos may be handled only by specialists.
▶ Take breaks and do physical exercises to improve the blood circulation in your fingers. Exposure to
vibration during long periods of work can lead to disorders of the blood vessels and nervous system in
the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool can become live, presenting a risk of electric shock, if you
accidentally damage an electric cable.
Careful handling and use of electric tools
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Product overview
3.2 Intended use
The product described is an electrically-powered breaker with pneumatic hammering mechanism. It is
designed for heavy chiseling work on masonry and concrete.
*2064795*
Printed: 08.07.2019 | Doc-Nr: PUB / 5200550 / 000 / 05
1
2064795
Chuck and chisel position adjustment
@
Cooling slots
;
Clamping band
=
Air vents
%
Side handle
&
On / off switch
(
Grip
)
Display
+
Service indicator
§
Power level indicator
/
Supply cord
:
Rating plate
∙
Knob
$
English 15