Whirlpool CGT9100GQ Instrucciones De Instalación página 14

STACKED WASHER/ELECTRIC DRYER
INSTALLATION REQUIREMENTS
Dryer Direct Wire
Use 10 gauge copper wire.
Use a UL listed strain relief.
Disconnect power before making electrical connections.
Connect neutral wire (white or center wire) to center
terminal.
Ground wire (green or bare wire) must be connected
to green ground connector.
Connect remaining 2 supply wires to remaining
2 terminals (gold).
Securely tighten all electrical connections.
Failure to do so can result in death, re, or
electrical shock.
If connecting by direct wire:
Power supply cable must match power supply (4-wire or 3-wire)
and be:
n Flexible armored cable or nonmetallic sheathed copper
cable (with ground wire), covered with flexible metallic
conduit. All current-carrying wires must be insulated.
n 10 gauge copper wire (do not use aluminum).
n At least 5 ft. (1.52 m) long.
14
Fire Hazard