Whirlpool CGT9100GQ Instrucciones De Instalación página 39

OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED:
Code Explanation
SPECIAL CYCLE PRICE (DRYER)
3.06
3.06 Represents the number of quarters (coin 1)
to start the dryer; may adjust from 0–200
(See VALUE OF COIN 1). Advance from 0–200 by
pressing the upper left (COTTON/WHITES) button.
Factory default of 6 quarters = $1.50.
• Press the lower middle (WARM) button once
to advance to next code.
3. 08 SPECIAL CYCLE PRICE (WASHER)
3. 08 Represents the number of quarters (coin 1) to start
the washer; may adjust from 0–200 (See VALUE
OF COIN 1). Increase by pressing the middle left
(COTTON/WHITES) button, decrease by pressing
the lower left (HOT) button. Factory default of
8 quarters = $2.00.
• Press the lower middle (WARM) button once
to advance to next code.
4.05 SPECIAL DRY TIME (DRYER)
4.05 Represents the number of minutes per quarter
(coin 1). Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper left (COTTON/WHITES)
button, the value can be adjusted from 1–99
minutes.
• Press the lower middle (WARM) button once
to advance to next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute
setting; select 0–59 minutes by pressing the
lower left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
TIME-OF-DAY CLOCK, HOURS
6. 00
NOTE: Uses military time or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the lower left
(HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the START HOUR; 0–23 hours.
Select START HOUR by pressing the lower left
(HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the STOP HOUR; 0–23 hours.
Select STOP HOUR by pressing the lower left
(HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
ELECTRONIC CONTROL SET-UP INSTRUCTIONS
Code Explanation
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by "0" indicates no selection that
particular day (9.10). A number followed by an "S"
indicates selected for that day (9.1S). To change
the value of "0" and "S," use the lower right
(COLD) button.
Days of the week (1–7) are selected by pressing
the lower left (HOT) button.
When exiting set-up code "9," the display must
show the current day of week:
DISPLAY DAY OF WEEK
10 Day 1=Sunday
20 Day 2=Monday
30 Day 3=Tuesday
40 Day 4=Wednesday
50 Day 5=Thursday
60 Day 6=Friday
70 Day 7=Saturday
• Press the lower middle (WARM) button once
to advance to next code.
A. 00 VAULT VIEWING OPTION
This option is either NOT SELECTED "00"
or SELECTED "SC."
A. 00 Not Selected "00."
A. SC Selected "SC." Press the lower right (COLD)
button once for this selection. When selected,
the money and/or cycle counts will be viewable
(if counter option[s] is selected) when the coin
box is removed.
• Press the lower middle (WARM) button once
to advance to next code.
VALUE OF COIN 1
b. 05
b. 05 This represents the value of coin 1 in number of
nickels: 05 = $0.25. Increase between 1 and 200
nickels by pressing the middle left (COTTON/
WHITES) button, decrease by pressing the lower
left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
C. 20 VALUE OF COIN 2/
VALUE OF DRYER TOP OFF
C. 20 This represents the value of coin 2 in number of
nickels: 20 = $1.00. Increase between 1 and 200
nickels by pressing the middle left (COTTON/
WHITES) button, decrease by pressing the lower
left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
ADD COINS OPTION
E. 00
This option is either NOT SELECTED "00" or
SELECTED "AC." This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
E. 00 Not Selected "00."
E. AC Selected "AC." Press the lower right (COLD)
button three consecutive times to change
this selection.
• Press the lower middle (WARM) button once
to advance to next code.
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
39