Loading And Unloading A Cassette Tape - memorex MVD4540B Manual De Instrucciones

Loading and Unloading a cassette tape

Use only video cassette tapes marked
Loading
Push the center of the tape until it is automatically
inserted.
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1
Press EJECT on the unit or the Remote.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
Tape speed and maximum recording time
Tape Speed
SP (Standard Play)
2-2/3 hours
SLP (Super Long Play)
22
2C51001AE (20-25)
VCR
Screwdriver
T-160 T-120
2 hours
8 hours 6 hours
22
.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Erase prevention tab
2
Remove the cassette tape.
To record again
Cover the hole with a piece of adhesive tape.
Adhesive tape
Video cassette tape
T-90
1-1/2 hours 1 hour
4-1/2 hours 3 hours
18/11/03, 2:38 PM
T-60 T-30
30 minutes
1-1/2 hours