Zero Return Function; Video Index Search System; Recording - memorex MVD4540B Manual De Instrucciones

ZERO RETURN function / Video index search system

ZERO RETURN function

This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
1 2 3
4 5 6
7 8 9
CH
TRACKING/
SET
–
SELECT/
ENTER
CH
SETUP/ CLEAR/
DVD MENU
VCR MENU CANCEL
MARKER ZOOM TOP MENU
AUDIO/ JUMP/ ANGLE/
AUDIO SELECT ZERO RETURN COUNTER RESET
SUB TITLE/ PLAY MODE/
TIMER REC
ATR
REW/SEARCH PLAY
INDEX/SKIP STOP
REC/OTR SLOW
NOTES for Counter Display:
•
If you rewind the tape beyond
"00:00:00", a minus sign ("–") will be
displayed in front of the time.
• When you load a tape, the counter will
reset to "00:00:00".
•
The counter does not function on
nonrecorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter stops.
NOTES for Video index search system:
• When you record an INDEX mark at
the very beginning of the tape, the
mark may not be found.
•
During INDEX search, the tape may
stop and begin to play at a slightly
different location.
• INDEX may not function properly with
old or worn out video tapes.
• INDEX marks may not be found if it is
extremely close to the point where the
search began.
•
In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.
2C51001AE (20-25)
Preparation:
• Turn ON the TV and set it to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
DISPLAY/CALL
1
INPUT SELECT/
PROGRESSIVE
0
2
TRACKING/
SET
+
3
RETURN
REPEAT A-B
CLOCK/
COUNTER
The CLOCK/COUNTER-button
Press CLOCK/COUNTER. The clock and tape
TV/VCR
SPEED
counter alternate with each other in the display.
SEARCH/F.FWD
SKIP/INDEX
PAUSE/STILL

Video index search system

This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.
Index Search
Press INDEX
mode.
For Succeeding programs: Press INDEX
For Preceding programs: Press INDEX
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX
unit starts searching the INDEX NO.
selected and finds the portion, then playback
starts automatically.
To stop the Index Search, press STOP.
25
Press CALL.
The counter display shows the tape
running time during playback or

recording.

VCR
Press COUNTER RESET at the desired
tape position. The counter display will be
reset to the "00:00:00" position (e.g. the
beginning of recording).
VCR
Press STOP when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the "00:00:00" position.
or during stop or play
or is pressed, the
18/11/03, 2:38 PM
8 : 47 MON
AM
HI-FI
00 : 04 : 38 SP
8 : 47 MON
AM
HI-FI
00 : 00 : 00 SP
VCR
VCR
CH 001
INDEX
+3
.
.
or is displayed
INDEX NO. (up to 9)
25