Pizza Function ("Pizza") - cosori CO130-AO Manual De Usuario

EN

Pizza Function ("PIZZA")

This function melts and browns cheese and
toppings, while crisping crust.
Heating Elements: Top and bottom heating
elements cycle on and off
Rack Position: Mid
1. Insert wire rack at mid position and close
the oven door.
2. Turn the FUNCTION
which will blink on the display.
3. Optionally, customize the temperature
and time. You can do this anytime during
cooking (except during preheating).
a. Turn the
the time between 1 min–2 hr.
b. Press the
control temperature. Turn the knob
to adjust the temperature between
150°–450°F / 65°–232°C.
Note: Try a slightly longer cooking time for pizzas
with thicker crust, and an even longer cooking time
for frozen pizzas.
4. Press START/CANCEL
Preheating will start automatically. The
START/CANCEL button will blink, and the
display will show "
Note: Pressing START/CANCEL
preheating will cancel preheating and immediately
start cooking.
16
knob to "PIZZA",
TIME/TEMP
knob to adjust
TIME/TEMP
knob once to
to begin.
".
again during
5. When preheating is finished, the oven will
beep several times, the display will flash,
and the START/CANCEL button will blink
continuously.
6. Remove any cardboard, plastic, paper, or
other flammable materials. Place pizza on
a pan, and place the pan on the wire rack.
Close the oven door.
7. Press START/CANCEL
The button will light up, and the display
will show the timer counting down.
Note: For large pizzas, open the oven door halfway
through cooking and carefully turn the pizza 90
degrees for more even browning.
8. The oven will stop heating and beep
when finished.
to begin cooking.