EN
Rotisserie Function ("ROTISS")
This function is used for rotating roasts. Ideal
for roasting a whole chicken.
Heating Elements: Top and bottom heating
elements cycle on and off
Rack Position: Rotisserie slots
1. Turn the
FUNCTION
which will blink on the display.
2. Optionally, customize the temperature
and time. You can do this anytime during
cooking.
a. Turn the
the time between 1 min–6 hr.
b. Press the
control temperature. Turn the knob
to adjust the temperature between
150°–400°F / 65°–205°C.
3. Insert the food tray at low position to
collect drippings.
4. Place the whole chicken (or other food
item) on the rotisserie shaft. Place the
rotisserie forks on either side of the shaft
and insert them into the chicken to
secure it on the shaft. Tighten the knobs
on the forks to secure them.
[Figure
2.1-2.3]
5. Place the chicken inside the oven,
securing both ends of the rotisserie shaft
into the rotisserie slots. Close the oven
door.
22
knob to "ROTISS",
TIME/TEMP
knob to adjust
TIME/TEMP
knob once to
6. Press
START/CANCEL
The button will light up, and the display
will show the timer counting down.
7. The oven will stop heating and beep
when finished. Use the rotisserie handle
to take out the chicken.
Figure 2.1
Figure 2.2
Figure 2.3
to begin cooking.