Connect Pc To Web - Nokia E63 Guia Del Usuario

Ocultar thumbs Ver también para E63:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Data bearer
— Select
WLAN network name
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
Network status
are connecting to is hidden or
WLAN network mode
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
WLAN security mode
security mode that is used in the WLAN access point. If
you select WEP (wired equivalent privacy), 802.1x or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings.
WLAN security settings
for the selected security mode.
Homepage
— Enter the web address of the page you
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select
Menu
Connectivity
>
© 2008-2009 Nokia. All rights reserved.
Wireless
LAN.
— To enter the service set
Enter
manually. To select the
Search for
— Select
Hidden
if the network you
Public
if it is not hidden.
— If you select
— You must select the same
— Edit the security settings
WLAN
wiz..
>
Advanced access point settings
for WLAN
Select
Menu
Tools
>
>
points.
After setting up a basic access point for WLAN, select
Options
Advanced settings
>
advanced settings:
IPv4 settings
— Enter the device IP and name server
addresses for the IPv4 internet protocol.
IPv6 settings
— Select or enter the name server
addresses for the IPv6 internet protocol.
Ad-hoc channel
— The channel is usually chosen
automatically. To enter the channel number (1-11)
manually, select
User
Proxy server address
Proxy port number
number.

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
device and your PC.
2. Select
Connect PC to
automatically installed from your device to the PC.
Settings
Connection
>
and define the following
defined.
— Enter the proxy server address.
— Enter the proxy server port
web. The necessary software is
Internet
Access
>
71

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido