Firmware Update; Other Setting & Functions Of The Console; Setting Alarm Time - Bresser Tuya Smart Manual De Instrucciones

FIRMWARE UPDATE

The console can be updated through your WI-FI network. If new firmware is available, a
notification or pop up message will be shown on your mobile when you open the App. Follow the
instruction in the App to do the update .
During the update process, the console will show the
progress status percentage at the bottom of the screen .
Once the update complete, the console screen will reset
and back to normal mode . Please ignore App update
fail message, if the console can restart and show the
normal screen after the update process completed .
IMPORTANT NOTE:
- Please keep connecting the power during the firmware update process.
- Please make sure your console WI-FI connection is stable .
- When the update process start, do not operate the console until the update is finished.
- Settings and data maybe lost during update .
- During firmware update the console will stop upload data to the cloud server. It will reconnect to your
WI-FI router and upload the data again once the firmware update succeed. If the console cannot
connect to your router, please enter the SETUP page to setup again .
- Firmware update process have potential risk, which cannot guarantee 100% success . If the update
fail, please redo the above step to update again .
- If firmware update fail, press and hold the [C/F] and [REFRESH] key at the same time with 10
seconds to back to original version, then redo the update procedure again .
OTHER SETTING & FUNCTIONS OF THE CONSOLE
MANUAL CLOCK SETTING
This console is designed to obtain the local time by synchronizing with your local time . If you want
to use it off line, you can set the time and date manually. During the first time startup, press and
hold the [ SENSOR / WI-FI ] key for 6 seconds and let the console back to normal mode .
1 . In normal mode, press and hold [ TIME SET ] key for 2 seconds to enter setting .
2 . The setting sequence: 12/24 hour format
Month Day
3 . Press [ + ] or [ - ] key to change the value . Press and hold the key for quick-adjust .
4 . Press [ TIME SET ] key to save and exit the setting mode, or it will automatically exit the
setting mode 60 seconds later without pressing any key .
NOTE:
- In normal mode, press [ TIME SET ] key to switch between year and date display .
- During the setting, you can back to normal model by press and hold [ TIME SET ] key for 2 seconds .

SETTING ALARM TIME

1 . In normal time mode, press and hold [ MODE / ALARM ] key for 2 seconds until the alarm
hour digit flashes to enter alarm time setting mode.
2 . Press [ + ] or [ - ] key to change the value . Press and hold the key for quick-adjust .
3 . Press [ MODE / ALARM ] key again to step the setting value to Minute with the Minute digit
flashing.
4 . Press [ + ] or [ - ] key to adjust the value of the flashing digit.
5 . Press [ MODE / ALARM ] key to save and exit the setting .
NOTE:
- In alarm mode, the "
- The alarm function will turn on automatically once you set the alarm time .
Time sync ON/OFF
" icon will display on the LCD .
Hour Minute
weekday Language .
32
Year M-D/D-M format