Aiwa HV-FX8100U Instrucciones De Manejo página 21

4
Press SET/TRACKING + or – to select AUTO CH
MEMORY, then press ENTER.
C H S E T U P
T V C AT V
AUTO CH MEMORY
A D D / D E L E T E
G U I D E C H S E T
All available channels in your area are scanned and
stored in the memory of the VCR.
After scanning, the channel screen appears.
CATV channels
CATV systems use letters and numerals to designate
channels. The table below shows the channel numbers of
the CATV system and the corresponding channel number
displayed on this VCR. For more information on available
channels in your area, consult your local CATV company.
Channels displayed on this VCR
01
02 to 13
14 to 36
37 to 94
95 to 99
100 to 124
125
Tip
To interrupt the Auto Channel Memory, press MENU.
Note
Once you conduct the Auto Channel Memory, the previous
settings will be canceled.
CATV channels
5A
2 to 13
A to W
W+1 to W+58
A-5 to A-1
W+59 to W+83
W+84
Adding or erasing the channels
manually
If the Auto Channel Memory does not set the channels
correctly, add them manually for watching TV programs.
Also, you can erase the unnecessary channels.
1
Press MENU.
2
Press SET/TRACKING + or – to select CH SET UP,
then press ENTER.
M E N U
T I M E R R E C S E T
C H S E T U P
V C R S E T U P
S Y S T E M S E T U P
N O N O I S E B AC K G RO U N D
3
Press SET/TRACKING + or – to select ADD/DELETE,
then press ENTER.
C H S E T U P
T V C AT V
AUTO CH MEMORY
A D D / D E L E T E
G U I D E C H S E T
4
Press SET/TRACKING + or – to select the channel
number to be erased or added.
When the selected channel is already set, ADD appears.
When it is not set, DELETE appears.
DELETE
5
Press ENTER to erase or add a selected channel.
6
If you want to add or erase another channel, repeat
steps 4 and 5.
7
Press MENU 3 times to return to the normal screen.
If a selected channel is showing a
distorted picture and noisy sound
It is possible to select a blue screen on the TV instead of a
distorted picture and noisy sound. Select NO NOISE
BACKGROUND on the menu by pressing the SET/
TRACKING + or –, then press ENTER to set to ON.
Press MENU to return to the normal screen.
NO NOISE BACKGROUND
ON: For no or noisy channels, the blue screen appears.
OFF: For no or noisy channels, the channel is shown with
a distorted picture and noisy sound.
After unpacking the VCR, this setting is set to ON.
M E N U
T I M E R R E C S E T
C H S E T U P
V C R S E T U P
S Y S T E M S E T U P
N O N O I S E B AC K G RO U N D
O N O F F
CH125
O N O F F
14
ENGLISH