Kenwood CCC20 Manual De Uso página 11

Manual Mode continued
Cold Ingredients
Operate in short bursts for chopping or hold down for longer burst to puree and blend
food down.
Note: The chop function does not operate continuously when the unit or ingredients
are cold. If the button is manually held down the display will countdown from 2
minutes.
Hot Unit/Ingredients (Hot Temperature Warning on display)
Note: To prevent excessive splashing the speed will be restricted following a heating
cycle or whilst the bowl/ingredients are still hot. Hold the button down and the speed
will gradually increase until the desired processing speed is reached. The button will
operate for a maximum of 2 minutes before automatically switching off.
To stop the operation before the 2 minutes has elapsed either press the Cancel button
or press the Chop button again.
l
The filler cap should always be fitted when using the chopping
function.
After selecting a programme or manually setting the required function, press the
Start/Pause button once to commence the cooking process.
Press the button again to pause the operation. The display screen will flash when the
unit has been paused.
l
If the Start/Pause button is pressed without selecting a function the unit will beep 3
times to indicate an action is required.
8