Mp3/Wma Files; About The Erp (Only For Europe) - Teac SL-D930 Manual Del Usuario

Ocultar thumbs Ver también para SL-D930:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MP3/WMA files

This unit can play MP3 and WMA files that are on CD-R/
CD-RW discs.
o Audio file formats that can be played back
MP3 (file extension: .mp3)
Bit rate: 16 kbps to 320 kbps
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz,
WMA (file extension: .wma)
Bit rate: 16 kbps to 320 kbps
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz,
Note: Digital Rights Management (DRM) is not supported.
File information shown on the display
The display of this unit can only show single-byte alphanu-
meric characters.
o If the file information uses Japanese, Chinese or other
double-byte characters, playback is possible but the
name will not be shown correctly.
Precautions when using computers
and other devices to create files
o Always include the extension in the file name. Files
without extensions cannot be played.
o After recording to a CD-R/CD-RW, always close the ses-
sion (complete disc creation). This unit cannot play a
disc if its session has not been closed.
o A maximum of 999 files and 99 folders on a disc can be
played. If the media has more than these maximums,
this unit might not be able to correctly play any file that
is the 1000th or higher or any folder that is the 100th or
higher.
12
12
44.1 kHz, 48 kHz
44.1 kHz, 48 kHz

About the ErP (only for Europe)

This product is compliant with the European ErP Standby
Power Regulation. In order to comply with this regulation,
the automatic power saving function of this unit is set to
ON when shipped new, so the unit will automatically enter
standby if there is no audio output for about 30 minutes.
o When AUX is selected, the unit will automatically enter
standby if there is no input for eight hours.
If you want to disable the automatic power saving func-
tion, do the following.
1) Connect the AC power cord.
2) Press the STANDBY/ON button.
3) Press the FUNCTION button to select "AUX".
4) Press and hold the play/pause (7/9) button for at
least two seconds.
5) When "ERP-ON" is displayed, press a skip (.m or
,/) button to select "ERP-OFF".
6) Press the play/pause (7/9) button to exit setting mode.

Publicidad

Tabla de contenido
loading

Tabla de contenido