Mp3/Wma Files; Bluetooth Function - Teac SL-D930 Manual Del Usuario

MP3/WMA files

Playback is not possible.
e Check the file format. MP3 files are recognized by
the ".mp3" file extension and WMA files by the ".wma"
extension.
e The MP3/WMA file might be damaged.
e Confirm that the file format is one that this unit can
play back (page 12).
The song name, artist name and album name do not
appear on the display.
e There is no ID3 tag information for the music file. Edit
the song name, artist name, and album information of
the song on a PC using a suitable application.
Some unknown characters are displayed on the
display.
e If the file information uses Japanese, Chinese or other
double-byte characters, playback is possible but the
name will not be shown correctly.
46 46
Troubleshooting (2)

Bluetooth function

Pairing fails.
e Refer to the Bluetooth device's operation manual.
e Turn this unit and the other Bluetooth device off and
e Turn off all Bluetooth devices other than the one you
e After deleting the "SL-D930" data from the other
Cannot connect.
e Confirm that the other Bluetooth device is on and its
e Are the unit and the other Bluetooth device too far
e Put this unit into standby and then turn it on again.
e Unpair the "SL-D930" from the Bluetooth device
The sound skips or there is noise.
e Is there a wireless LAN, other Bluetooth device, micro-
e Keep such devices as far away as possible.
e Reduce the distance between the other Bluetooth
e Try moving the other Bluetooth device and this unit.
on once. Then, try pairing again.
are trying to pair the unit with.
Bluetooth device, try pairing again.
Bluetooth function is enabled.
apart? Is there a wall or other obstruction between
them?
and follow the instructions in "Pairing with another
Bluetooth device" on page 35.
wave oven or similar electronic equipment nearby?
device and this unit during use.