Pairing With Another Bluetooth Device; Disconnecting A Device - Teac SL-D930 Manual Del Usuario

Pairing with another Bluetooth device

Pairing is necessary before using the Bluetooth function of
this unit for the first time and when you want to connect a
new Bluetooth device.
Follow these procedures to pair the unit with the other
device.
Pairing
1
Press the FUNCTION button to select
"BLUETOOTH".
o "BLUETOOTH" appears scrolling on the display.
2
Press the PAIRING button to put this unit
into pairing mode.
o "PAIRING" blinks on the display.
3
Enable the Bluetooth communication func-
tion on the other Bluetooth device.
4
From the Bluetooth device select "SL-D930"
(this unit).
o If a passkey is required during pairing, input "0000".
When connection succeeds, two short beeps will
sound and "CONNECTED" will appear on the display.
After five seconds, the name of the connected
Bluetooth device scrolls across the display of this unit
once and then the time appears.
Name of connected device scrolled once,
followed by time display
Time display
You can press the DISPLAY button to scroll the name
of the connected Bluetooth device again.
o If this unit cannot connect with a Bluetooth device for
two minutes, "NO DEVICE CONNECTED" will scroll across
this unit's display and pairing mode will end. After pair-
ing succeeds, pairing again should not be necessary.
o After pairing, the unit will search for the paired
Bluetooth device and connect to it.
o This unit can retain pairing data for up to 8 devices.
After 8 devices have been paired, if a new device is
paired, the oldest pairing will be overwritten.

Disconnecting a device

To disconnect with a connected Bluetooth device, press
the PAIRING button. Doing so will put the unit into pairing
mode.
o If you later want to connect that Bluetooth device to
this unit again, use that device to conduct the proce-
dures it requires to connect with this unit.
o If you press the FUNCTION button to change the func-
tion when connected, the device will be disconnected.
35 35