Setting The Clock - Teac SL-D930 Manual Del Usuario

Set the current time before using the unit.
You can set the clock both when the unit is on and in
standby.
1
Press and hold the CLOCK ADJUST button
for at least two seconds.
Press and hold for at least 2 seconds
Release the button when "12 H" or "24 H" blinks on the
display.
If you want to change the clock display mode, press
the ,/ button.
o If no button is pressed for 10 seconds, clock setting
mode will end.

Setting the clock (1)

2
3
Press the CLOCK ADJUST button again.
The "hour" value blinks.
Press the ,/ button to set the current
hour and press the CLOCK ADJUST button.
The "minute" value blinks.
Continued on the next page
21 21