Sears Kenmore 385.17628 Manual De Instrucciones página 60

Bar Tacking
(!) Stitch width:
(_) Stitch length:
(_) Needle thread tension:
0 Presser foot A:
2 to 6.5
05 to 1
2to6
Zigzag foot
This is similar to a very short satin stitch and is used
to reinforce points of strain such as corners, pockets
and straps of lingerie.
Sew four (4) to six (6) stitches.
Embroidery
(_ Stitch width: 1 to 65
%_)Stitch length: Any
(_) Needle thread tension: 2 to 6
O Presser foot: Removed
_) Feed dogs: Dropped
Drop the feed dog and remove the foot holder.
Adjust stitch width as desired. Draw a design onto
the fabric with tailor's chalk. Stretch the fabric
between embroidery hoops and place under the
needle.
Lower the presser foot lifter to engage the needle
thread tension. Holding the needle thread in your
left hand, rotate the handwheel counterclockwise for
one complete turn.
Pull the needle thread to draw the bobbin thread to
the right side of the fabric. At medium speed, stitch
along the marked outline, guiding the fabric carefully
by hand. After embroidery is completed, raise the
feed dogs for normal sewing°
LENGTH (_)
®
0
_ WIDTH
LENGTH
N. ----
52