Basic Playback - Teac PD-H600 Manual Del Usuario

1
1 Press the POWER switch to turn the unit on.
The standby indicator lights blue.
< When the system control functions are activated, always set this
switch on, and turn the unit on or standby using the remote
control unit (RC-1181) of the AG-H600 series receiver.
2 Press the open/close button (L) to open the disc tray.
3 Place a disc on the disc tray with the printed label faced up.
< The disc tray closes automatically after a minute.
< Place a disc in the center of the disc tray. If the disc is not
correctly placed, the disc tray may not open again after it closes.
4 Press the open/close button (L) to close the disc tray.
12

Basic Playback

3 D E 2 4 C
A 5 B
Standby indicator
Audio CD:
Stop
T15 43:08
Total number
of the tracks
MP3/WMA disc:
Stop
Total Files 144
Total number of files of the disc
< When you press the play/pause button (G/J) (or the numeric
buttons of the remote control unit) before closing the disc tray,
the disc tray closes and playback starts.
< Keep fingers clear of moving tray to avoid trapping them.
5 Press the play/pause button (G/J) to start playback.
Playback starts from the first track/file.
Audio CD:
CD/3
T01 00:42
Current track
number
MP3/WMA disc:
MP3/3
xxxxx xxx xxxxxx
Song title, artist name and album name (scrolled)
< When the play time of a file is more than 100 minutes, the
elapsed time is displayed in hours and minutes and the colon
flashes.
< When the play time of a file is more than 4 hours (240 minutes),
"OVER" appears instead of the elapsed time.
Total play time of
the disc
Elapsed time of the
current track
Elapsed time of the current file
(minutes and seconds)
00:42