Basic Operation; Repeat Play - Teac PD-H500 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Basic Operation

1
Press the open/close (∫) button.
The disc tray will slide out.
2
Load a disc with its label side facing
up.
3
Press the open/close button again.
The disc tray will close. At this time, use
care not to let your hand get trapped.
The total number of tracks and total
play time on the disc will be displayed.
Total Number
Total Play Time
of Tracks
4
Select the track you want by pressing
the music skip button (Ú/Æ).
5
Press the play button (∏), and the CD
will be played.
6
Press the pause button (ƒ) when you
want to pause playing.
7
Press the stop button when you want to
stop playing.
Note
This unit will automatically start playing in
the following cases:
OWhen you select CD on the amplifier (A-
H500).
OWhen you turn the system on with the
amplifier's input selector set to CD.
∑ Last position memory function
If the program button is pressed during
normal play, the player will revert to a
position at which the stop button was
previously pressed. Then, the playing will
restart from that particular position.
_ 8 _

Repeat Play

(You can use this function only with the
remote control unit.)
∑ One-repeat play function
OPress the 1/ALL repeat button once.
- Only the current track is played
repeatedly.
* If you select other tracks during one-
repeat play, the track selected last
will be repeated.
∑ All-repeat play function
OPress the 1/ALL repeat button once
more.
- All the tracks on a disc is played
repeatedly.
* When the tracks are programmed,
only the programmed tracks will be
repeated.
* Press the button once more to cancel
the 1/ALL repeat play function.
First
Track
∑ A-B repeat play function
(1) During play, press the A-B repeat
button at the desired start point (A).
- Then "A-" will be displayed and "B"
will blink on the display.
(2) Press the button again at the desired
end point (B).
- Then "A-B" will be displayed and only
A-B
section
will
be
repeatedly.
(3) Press the button once more to cancel
the A-B repeat play function.
Last
Track
played

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido