Bose CINEMATE II Serie Guía De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S
S
YSTEM
ETUP
The interface module receives commands from the
remote control and provides audio input connections
for the CineMate
®
system. The remote control
commands allow you to turn the speakers on, change
the volume, and mute or turn off the speaker system.
5. Place the interface module:
• on a flat surface near the TV and other home
theater equipment
• within 15 feet (4.6 meters) of the Acoustimass
module
• NOT in direct sunlight
If you position the interface module on a shelf,
make sure the front edge of the module is flush
with the front edge of the shelf. If on a high shelf,
make sure the front edge of the module extends
slightly past the front of the shelf, so the shelf does
not block signals from the remote control.
Peel the protective film off the lens on the front of
the interface module.
Note: The remote should have a clear line of sight to
the interface module, the TV, and any other equipment
it will control.
6
Svenska
Nederlands
CAUTION: When positioning the interface module,
avoid blocking any ventilation openings on the TV or
other electronic equipment.
Continue with
®
Français
Italiano
Deutsch
Español
2
on the next page.
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cinemate gs ii serie

Tabla de contenido