Operation
➤ To increase the cooling capacity, turn the cooling capacity control clock-
wise.
For the maximum cooling capacity turn the cooling capacity control
clockwise all the way to the stop (max position).
➤ To decrease the cooling capacity, turn the cooling capacity control coun-
terclockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all
the way to the stop (off position).
When the cooler is connected to the DC socket, the cooling capacity cannot
be adjusted.
6
Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE! Risk of damage
Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygien-
ic reasons (please also refer to the chapter "Cleaning and
maintenance" on page 24).
A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
22
CoolFun CX26, CXT26, CX30
EN