Consumables; Technical Data - Hilti DAG 115-S Manual De Instrucciones

3 Consumables

Discs with a diameter of max. 115 mm, designed for a speed of 11000/min and a peripheral speed of 80 m/sec,
and with a maximum thickness of 6.4 mm (abrasive grinding discs) or 2.5 mm (abrasive cutting discs).
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Assignment of discs to the equipment used
Equipment AC‑D
Guard X
Guard with cover X
plate
Side handle X
Clamping nut X
Clamping flange X

4 Technical data

Right of technical changes reserved.
Power tool
Rated current / power input
Rated frequency
Rated speed
Abrasive cutting discs
Dimensions (L x H x W) without hood
Weight in accordance with EPTA procedure 01/2003
Information about the power tool and applications
Drive spindle thread (arbor size)
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (in accordance with EN 60745‑1):
Typical A-weighted sound power level, DAG 115-S
Typical A-weighted emission sound pressure level,
DAG 115-S
Application
Cutting
Cutting
Rough grinding
Rough grinding
AG-D AF-D
X X
- -
X X
X X
X X
DAG 115‑S
Rated voltage 230 V: 3.8 A / 840 W
Rated voltage 110 V: 8.0 A / 840 W
50...60 Hz
11,000/min
∅ Max. 115 mm
271 mm x 103 mm x 78 mm
2.0 kg
M 14
Protection class II (double insulated)
97 dB (A)
86 dB (A)
Designation
AC‑D
DC‑D
AG‑D, AF‑D, AN‑D
DG‑CW
AN-D DG‑CW
X X
- -
X X
X X
X X
Material
metal
mineral
metal
mineral
DC‑D
X
X
X
X
X
17
en