Consumables - Hilti DAG 500-D Manual De Instrucciones

2.8 DC‑EX 125/5"‑M dust removal hood with guide carriage for cutting and slitting 3
Cutting and slitting work on mineral materials may be carried out only when the power tool is equipped with a dust
removal hood with guide carriage.
CAUTION
Use of this guard for working on metal is not permissible.
en
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting and slitting mineral materials, such as concrete or stone. These
serve to protect the operator and increase the life of the power tool and disc used.
2.9 DC‑EX 125/5"‑C compact dust removal hood for cutting 4
For cutting masonry and concrete.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting and slitting mineral materials, such as concrete or stone. These
serve to protect the operator and increase the life of the power tool and disc used.
2.10 Guard with side cover 5
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the
guard with cover plate.
2.11 Front cover for the disc guard 6
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the
guard with front cover.

3 Consumables

Discs with a diameter of max. 5", designed for a speed of 11000/min and a peripheral speed of 80 m/sec, and
with a maximum thickness of ¼" (abrasive grinding discs) or ¹⁄₈" (abrasive cutting discs).
Discs / wire brushes
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Wire brushes
Assignment of discs to the equipment used
Item Equipment
A Guard
B Front cover (in
combination with
A)
C Guard with cover
plate (optional for
A, B)
4
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
Wire brushes
AC‑D AG-D AF-D
X X X
- -
X
- -
X
Designation
AC‑D
DC‑D
AG‑D, AF‑D, AN‑D
DG‑CW
3CS, 4CS, 3SS, 4SS
AN-D DC‑D
DG‑CW
X X X
- -
X
- -
X
Material
metal
mineral
metal
mineral
metal
3CS/3SS/4CS/4SS
X
X
-