Certificate Of Conformity - Narex EPL 12-7 BE Instrucciones De Uso

English
Warranty
Our equipment is under warranty for at least 12 months with regard to
material or production faults in accordance with national legislation. In
the EU countries, the warranty period for exclusively private use is 24
months (an invoice or delivery note is required as proof of purchase).
Damage resulting from, in particular, normal wear and tear, overloading,
improper handling, or caused by the user or other damage caused by
not following the operating instructions, or any fault acknowledged at
the time of purchase, is not covered by the warranty.
Complaints will only be acknowledged if the equipment has not been
dismantled before being sent back to the suppliers or to an authorised
NAREX customer support workshop. Store the operating instructions,
safety notes, spare parts list and proof of purchase in a safe place. In ad-
dition, the manufacturer's current warranty conditions apply.
Information about noise level and
vibrations
The values have been measured in conformity with EN 60745.
Acoustic pressure level L = 86 dB (A)
pA
Acoustic power level L = 97 dB (A)
wA
In accuracy of measurements K = 3 dB (A)
ATTENTION! Noise is generated during work!
Use ear protection!
Vibration emission value a (vector sum for three directions) and
h
uncertainty K measured in accordance with EN 60745:
Sawing wood a = 4.5 m.s -2
h,D
In accuracy of measurements K = 2.0 m.s
Sawing metal a = 3.0 m.s
-2
h,ID
In accuracy of measurements K = 2.0 m.s
The emission values specified (vibration, noise) were measured in ac-
cordance with the test conditions stipulated in EN 60745 and are intend-
ed for machine comparisons. They are also used for making preliminary
estimates regarding vibration and noise loads during operation.
The emission values specified refer to the main applications for which
the power tool is used. If the electric power tool is used for other ap-
plications, with other tools or is not maintained sufficiently prior to
operation, however, the vibration and noise load may be higher when
the tool is used.
Take into account any machine idling times and downtimes to estimate
these values more accurately for a specified time period. This may sig-
nificantly reduce the load during the machine operating period.

Certificate of Conformity

We declare that the device meets requirements of the following stand-
ards and directives.
Safety:
EN 60745-1; EN 60745-2-11
Directive 2006/42/EC
Electromagnetic compatibility:
EN 55014-1; EN 55014-2; EN 61000-3-2;EN 61000-3-3
Directive 2004/108/EC
2013
Narex s.r.o.
Chelčického 1932
470 01 Česká Lípa
Changes are reserved
22
-2
-2
Antonín Pomeisl
CEO of the company
01. 06. 2013