Tabla De Contenido; General Information; Components, Operating Controls And Indicators - Hilti WSC 7.25-S Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
WSC 7.25-S circular saw
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Description
3 Insert tools, accessories
4 Technical data
5 Safety instructions
6 Operation
7 Care and maintenance
8 Troubleshooting
9 Disposal
10 Manufacturer's warranty - tools
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
In these operating instructions, the designation "the
power tool" always refers to the WSC 7.25-S circular
saw.
Components, operating controls and indicators 1
On / off switch
@
Auxiliary grip
;
Drive spindle lockbutton
=
Hexagon socket wrench
%
Cutting angle scale
&
Clamping lever for cutting angle adjustment
(
Clamping screw for rip fence
Page
)
Clamping lever for cutting depth adjustment
1
+
45°cutting line indicator
2
§
0°cutting line indicator
4
/
Parallel guide (rip fence)
4
:
Pivoting guard
4
·
Base plate
8
$
Guard
9
£
Drive spindle
10
|
Mounting flange
10
¡
11 Clamping flange
Q
Clamping screw
W
Cutting depth scale
E
Pivoting guard operating lever
R
Cutting angle setting
T
LED
Z
Guide rail adapter 2
Rear retaining lug
I
Front retaining lug
O
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning: Warning: hot
electricity surface
en
1