Insert Tools, Accessories; Technical Data; Safety Instructions; Work Area Safety - Hilti WSC 7.25-S Manual De Instrucciones

3 Insert tools, accessories

Accessories for the SCW 70
Designation
Parallel guide (rip fence)
en
Guide rail
Guide rail adapter
Recommended saw blade for the SCW 70
Designation
Saw blade
Recommended saw blade for the WSC 7.25-S
Designation
Saw blade

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Mains frequency
Weight
Supply cord length
Dimensions (L x W x H)
Base plate
Maximum saw blade diameter
Minimum saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Cutting depth
Speed under no load
Protection class

5 Safety instructions

5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
4
Description
WGS 1400‑2B
Short designation
W-CSC 190x30 z24 A
Short designation
W-CSC 7 ¹⁄₄x⁵⁄₈ t24 GP
WSC 7.25‑S
120 V
60 Hz
5.3 kg (11.68 lb)
2.5 m (8.2 ft)
317 mm (12.48") x 236 mm (9.29") x 269 mm (10.59")
290 mm (11.42") x 170 mm (6.69")
190 mm (7.48")
184 mm (7.24")
1.1...1.5 mm (0.04...0.06")
1.7...2.3 mm (0.07...0.09")
15.88 mm (⁵⁄₈")
Cutting angle 0°: 62.5 mm (2.46")
Cutting angle 45°: 43.5 mm (1.71")
Cutting angle 56°: 32.5 mm (1.28")
5,800/min
Protection class II (double insulated), see rating plate
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.