CAUTION:
Do not open the lid while the water is boiling. If the
kettle jug is filled beyond its maximum capacity,
boiling water can splash out. The appliance becomes
very hot during operation and maintains the heat
during some time after disconnection.
Never open the housing of the appliance. This can result
in electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
BEFORE USING THE APPLIANCE THE FIRST TIME
1.
Remove all packaging materials
and any transport safety devices.
Keep packaging materials away
from children - danger of suffoca-
tion!
2.
Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3.
Check to make sure that the appli-
ance is stable.
4.
Connect the base via the power
cord to the power supply (220–
240 V~, 50/60 Hz).
5.
Remove the kettle from the base.
6.
Press the opening button on top
of the handle. The lid is released
and can be open.
7.
Add clear, cold water to the "Max"
marking.
8.
Close the lid by pressing lightly.
9.
Place the kettle level on the base.
10. Switch on the kettle by pressing
the ON/OFF switch downwards
into the „I"-position. The kettle
cannot be switched on if it is not
properly seated on the base.
11. When the water boils, the appli-
ance automatically shuts off.
12. For hygienic reasons, please dis-
card the water from the first boil-
ing.
19